Lexus LS500 - Page 92

92
3-4. Setup
LS500_LS500h_Navi_OM50F66U_(U)
select an arrow to adjust the direction
and select “OK”.
● The bell sounds only when the vehicle
approaches this point in the direction that
has been set.
1 Select “Delete”.
2 Select the desired item to be
deleted.
 Press the button on the Remote
Touch. The following button can be
displayed.
“Delete All”: Select to delete all destina-
tions on the list.
3 Select “Yes” when the confirmation
screen appears.
Areas to be avoided because of traffic
jams, construction work or other rea-
sons can be registered as “Areas to
Avoid”.
1 Display the navigation settings
screen:
 “MENU” button → “Setup” →
“Navigation”
2 Select “Areas to Avoid”.
3 Select the desired item.
Select to register areas to avoid.
(→P.92)
Select to edit areas to avoid.
(→P.92)
Select to delete areas to avoid.
(→P.93)
1 Select “New”.
2 Select the desired item to search
for the location. (→P.72)
3 Select either or to
change the size of the area to be
avoided and select “OK”.
4 Select “OK” when the area to avoid
screen appears.
● If a destination is entered in the area to
avoid or the route calculation cannot be
made without running through the area
to avoid, a route passing through the area
to be avoided may be shown.
● Up to 10 locations can be registered as
points/areas to avoid.
The name, location and/or area size of
a registered area can be edited.
1 Select “Edit”.
2 Select the desired area.
Deleting favorites list entries
Setting up areas to avoid
Registering areas to avoid
Editing areas to avoid
A
B
C