Lexus LS600hl - Page 161

161
3-3. Adjusting the seats
3
Operation of each component
LS600hL_U(OM50D26U)
■ Power easy access system operations
● If the seat is already close to the rearmost position, the auto away function may not
operate when the driver exits the vehicle.
● If the seat position is adjusted during the auto away function’s operation, the opera-
tion will stop.
● If the seat position is adjusted during or after the auto away function’s operation, the
auto return function will not operate when entering the vehicle.
■ Operating the foldable head restraint (vehicles with relaxation seat)
● If the seatback angle is adjusted using the switches located on the side of the front
passenger's seat or center console when the power switch is in ON mode, the
head restraint will operate as follows:
• When tilting the seatback forward:
After the seatback movement ends, the head restraint starts to rise and fold. A
signal beeps once operation is complete. If the switch is released during the
operation, the head restraint will return to the neutral position.
• When tilting the seatback backward:
If the head restraint is folded, it will return to the neutral position.
● In the following situations, the head restraint will not operate even when the seat-
back angle adjustment switch is operated:
• The power switch is off.
• The weight of an occupant or heavy object, etc. is detected on the front passen-
ger's seat.
• The front passenger's seat belt is fastened.
• The front passenger's door is open.
■ Operating the front passenger's seat from the rear seat (vehicles with relaxation
seat)
The front passenger's seat can be operated when the power switch is in ON mode.
However, in the following situations, the front passenger's seat does not move even
when the switch is operated:
● The weight of an occupant or heavy object etc. is detected on the front passenger's
seat.
● The front passenger's seat belt is fastened.
● The front passenger's door is open. (The front seat will not move forward.)