181
3-3. Adjusting the seats
3
Operation of each component
LS600hL_U(OM50D26U)
■ When driving position memory is linked with door unlock operation
If the driver’s door is opened, the driver’s seat will move toward the memorized posi-
tion but stop slightly beforehand to allow easy access to the vehicle.
Turning the power switch to ACCESSORY mode or fastening the driver’s seat belt
moves the seat fully into the memorized position.
■ Operating the driving position memory after turning the power switch off
Driver’s seat:
Memorized positions (except the steering wheel position) can be activated up to
180 seconds after the driver's door is opened and 60 seconds after it is closed
again, even after the power switch is turned off.
Front passenger’s seat:
Memorized position can be activated up to 180 seconds after the front passenger’s
door is opened, even after the power switch is turned off.
■ Correct seat position
When the seat is in the most forward or most backward position, and the seat is
being moved in those directions, the system may not correctly recognize the current
position and the memorized position will not be correctly recalled.
■ Seat operation automatic stop function (vehicles with relaxation seat)
If a front seat is likely to come into contact with the retractable table (4-seat models)
or the ottoman during seat operation or activation of the auto away function, a
buzzer will sound and seat slide operation will be stopped partway.
(A warning message will be shown on the multi-information display.)
■ Customization
The distance that the driver’s seat moves backward during the auto away function
can be changed. (Customizable features: P. 874)
■ Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear passen-
ger or squeeze your body against the steering wheel.
To Next Page
Loading...
