Lexus LS600hl - Page 183

183
3-3. Adjusting the seats
3
Operation of each component
LS600hL_U(OM50D26U)
Pressing the “C” button will disable
the seat position recall or seat
return function.
The indicator light comes on when the
function is disabled.
Pressing the button again will enable
the seat position recall or seat return
function.
■ Seat return function linked to the door opening operation
● Operating conditions
The power switch is in ON mode.
● Canceling operation partway through
During the seat return operation, performing either of the following actions cancels
the operation:
• Pressing the “SET”, “M” or “C” button
• Pressing any of the seat adjustment switches
● Seat return operation after turning the power switch off
The seat will automatically return to the neutral position if the door is opened within
approximately 45 seconds of the power switch being turned off.
Disabling the seat return function
CAUTION
■ Seat adjustment caution
Take care during seat adjustment so that the rear passengers do not strike the front
seats.