615
5-6. Using the hands-free phone system (for cellular phone)
5
Interior features
LS600hL_U(OM50D26U)
If an error message is displayed,
follow the guidance on the screen
to try again.
There are two connection methods available — automatic and manual.
■ Automatic
When you register your phone, auto
connection will be activated. Always
set it to this mode and leave the
Bluetooth
®
phone on the place
where connection can be estab-
lished.
When the power switch is turned to
ACCESSORY or ON mode, the
system will search for a nearby cel-
lular phone you have registered.
The system will connect with the
phone that was last connected, if it is
nearby.
When “Display Phone Status” is set
to “On”, the connection status is dis-
played. (P. 669)
Depending on the type of mobile
phone, mobile phone operations
may be necessary.
Bluetooth
®
phone connection
To Next Page
Loading...
