616
5-6. Using the hands-free phone system (for cellular phone)
LS600hL_U(OM50D26U)
■ Manual
When the auto connection has failed or “Bluetooth* Power” is turned off,
you must connect Bluetooth
®
manually.
Display the “Phone” screen. (P. 613)
Select “Connect Phone”.
Select the screen button cor-
responding to the desired
phone connection.
When the cellular phone’s device
name has not been able to be
obtained, “Device 1” to “Device 5”
will be displayed in the order the
phones were registered.
This screen is displayed.
If a completion message is dis-
played, connection is complete.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
3
4
To Next Page
Loading...
