617
5-6. Using the hands-free phone system (for cellular phone)
5
Interior features
LS600hL_U(OM50D26U)
■ Reconnecting to the Bluetooth
®
phone
If the system cannot connect due to poor signal strength with the power switch in
ACCESSORY or ON mode, the system will automatically attempt to reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this case, it must
be connected manually, or the phone must be re-selected or re-entered.
■ Connecting the phone while Bluetooth
®
audio is playing
● Bluetooth
®
audio will stop temporarily.
● It may take time to connect.
■ Connecting the phone while another Bluetooth
®
device is connected
When another Bluetooth
®
device is currently connected, a confirmation message
will be displayed. To disconnect the Bluetooth
®
device, select “Yes”.
■ Connecting the phone while 5 Bluetooth
®
devices have already been registered
When 5 Bluetooth
®
devices have already been registered, a registered device
needs to be deleted. Select “Yes” to delete one or more.
Select the device to be deleted, then select “Remove”, and “Yes”.
■ If the Bluetooth
®
phone has a Bluetooth
®
audio function
When the Bluetooth
®
phone to be registered has a Bluetooth
®
audio function, this
audio function will be registered automatically at the same time and confirmation
message may be displayed. If this screen is displayed, select “Yes” to connect the
audio function or select “No” to cancel the connection.
To Next Page
Loading...
