Lexus LS600hl - Page 720

720
5-9. Other interior features
LS600hL_U(OM50D26U)
Press the appropriate HomeLink

button. The HomeLink

indicator light
should turn on.
The HomeLink

compatible transceiver in your vehicle continues to send a
signal for up to 20 seconds as long as the button is pressed.
Press and hold the desired HomeLink

button. After 20 seconds, the
HomeLink

indicator light will start flashing slowly. Next, while still press-
ing and holding the HomeLink

button, press and hold the button on the
transmitter until the HomeLink

indicator light changes from a slow to a
rapid flash.
Press and hold the 2 outside buttons
for 10 seconds until the indicator
light flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink

memory.
■ Before programming
● Install a new battery in the remote control transmitter.
● The battery side of the remote control transmitter must be pointed away from the
HomeLink

button.
Operating HomeLink
®
Reprogramming a HomeLink
®
button
Erasing the entire HomeLink
®
memory (all three programs)