799
7-2. Steps to take in an emergency
7
When trouble arises
LS600hL_U(OM50D26U)
Take out the towing eyelet (P. 819)
Remove the eyelet cover using a
flathead screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehi-
cle body as shown in the illustration.
Insert the towing eyelet into the
hole and tighten partially by hand.
Tighten down the towing eyelet
securely using a wheel nut
wrench.
Installing towing eyelet
1
2
4
To Next Page
Loading...
