34
LS600hL_QG_U
■ Folding and extending the mirrors
■
Using the switch
Folds the mirrors
Extends the mirrors
■ Setting automatic mode
Automatic mode allows the folding or extending of the mirrors to be linked to locking/
unlocking of the doors.
To set to automatic mode, put the switch in
the neutral position.
The indicator will come on.
■ Linked mirror function when reversing
When the mirror select switch is in the “L” or “R” position, the outside rear view mirrors will
automatically angle downwards when the vehicle is reversing in order to give a better view
of the ground.
To disable this function, move the mirror select switch to the neutral position (between “L”
and “R”).
■ Adjusting the mirror angle when the vehicle is reversing
With the shift lever in R, adjust the mirror angle at a desired position.
The adjusted angle will be memorized and the mirror will automatically tilt to the memorized
angle whenever the shift lever is shifted to R from next time.
The memorized downward tilt position of the mirror is linked to the normal position
(angle adjusted with the shift lever in other than R). Therefore, if the normal position is
changed after adjustment, the tilt position will also change.
When the normal position is changed, readjust the angle in reversing.
1
2
To Next Page
Loading...
