34
37. Remove the HV battery.
Caution:
Wear insulated gloves.
(1) Install the HV battery bracket LH
to the position shown in the
illustration.
(2) Using an engine sling device,
remove the HV battery from
vehicle.
Notice:
Use cardboard or other similar material
to protect the HV battery and vehicle
body from damage.
If it is difficult to install the cable to the
bracket holes, use a suitable adaptor
such as a rope to install the cable.
Caution:
Set a stopper on the end of the fork to prevent the battery unit from sliding
off the end of the fork.
Stopper
Loop clutch
Shackle
To Next Page
Loading...
