COMFORT ADJUSTMENT
126
16X181b
"
1
Center line
2
449.5 mm (17.7 in.)
3
449.5 mm (17.7 in.)
4
6.5 mm (0.26 in.)
1. Remove the machine−sewed part of the floor carpet.
2. Remove the plastic clip securing the floor panel with a coin.
16X182b
"
1
Bolt
2
Anchor bracket
3
Spacer
3. Insert a 15 mm (0.6 in.) spacer, and tighten down the anchor
bracket for your child restraint system with a bolt. Torque the bolt
to 16.5 − 24.7 N·m (1.68 −2.52 kgf·m, 12.2 − 18.2 ft·lbf.).
To comply with Canada Motor Vehicle Safety Standards, vehicles
sold in Canada are provided with a bracket set in the glovebox,
designed for use with any of three anchor locations shown in the
illustration.
To Next Page
Loading...
