AIR CONDITIONING AND AUDIO
138
SETTING OPERATION − manual control
If manual air flow selection is desired −
20X021a
The outlets from which air is delivered can be selected manually by
pressing the button. The function of each mode is as follows:
1
Panel − Air flows mainly from the instrument panel vents.
2
Bi−level − Air flows from both the floor vents and the
instrument panel vents.
3
Floor − Air flows mainly from the floor vents.
4
Floor/Windshield − Air flows mainly from the floor vents and
windshield vents.
If quick heating or cooling is desired −
Turn the ”TEMP” knob until ”MAX. HOT” or ”MAX. COLD”
appears on the display.
If manual fan speed control is desired −
20X022a
"
1
Fan speed at low
2
Fan speed at high
The fan speed can be set to your desired speed by pushing the
appropriate side of fan speed control button. The higher the fan
speed is, the more air is delivered. Pushing the ”OFF” button turns
off the fan.
To remove exterior windshield frost, use the high speed setting.
To Next Page
Loading...
