AIR CONDITIONING
161
(a) Climate control
SETTING OPERATION − automatic control
20X019c
1. Push the ”AUTO” button.
Air flow quantity, switching of the diffusers, on−off of the air
conditioning, and switching of the air intake between
RECIRCULATED AIR and OUTSIDE AIR are automatically
adjusted. The operation status is shown by each indicator.
When one of the manual control buttons is depressed while
operating in automatic mode, the mode relevant to the
depressed button is set. Other conditions continue to be
adjusted automatically.
It is recommended that you close the lower vent. For details
about this, see page 168.
Push the ”OFF” button to turn the air conditioning off.
20X020a
2. Turn the ”TEMP” knob until the desired temperature is
displayed.
The ”TEMP” knob is used to set the desired passenger
compartment temperature. The temperature of air delivered
to the passenger compartment will be controlled automatically
according to the setting. The figures on the panel indicate
degrees Fahrenheit or Centigrade.
To Next Page
Loading...
