ENGINE
301
62X005a
If the oil level is below or only slightly above the low line,
add engine oil of the same type as already in the engine.
Remove the oil filler cap and add engine oil a little at a time,
checking the dipstick. The approximate quantity of oil needed
to fill between the low line and the full line on the dipstick is
indicated below for reference.
When the level reaches within the correct range, return the
filler cap and turn the cap clockwise until you hear a click.
Oil quantity. L (qt., lmp. qt.) 1.5 (1.6, 1.3)
NOTICE
Be careful not to drop the engine oil on the vehicle
components.
Avoid overfilling, or the engine could be damaged.
Check the oil level on the dipstick once again after
adding the oil.
Engine oil selection
Use API grade SJ “Energy−Conserving”, SL
“Energy−Conserving” or ILSAC multigrade engine oil.
Recommended viscosity (SAE):
62L005
Temperature range anticipated before next oil change
SAE 5W−30 is the best choice for your vehicle, for good
fuel economy, and good starting in cold weather.
If you use SAE 10W−30 engine oil in extremely low
temperatures, the engine may become difficult to start, so
SAE 5W−30 engine oil is recommended.
To Next Page
Loading...
