175
2-1. Driving procedures
2
When driving
LX570_U (OM60D99U)
Turn signal lever
■ Turn signals can be operated when
The “ENGINE START STOP” switch is in IGNITION ON mode.
■ If the indicators flash faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned out.
Right turn
Left turn
Move and hold the lever part-
way to signal a lane change.
The right hand signal will flash
until you release the lever.
Move and hold the lever part-
way to signal a lane change.
The left hand signal will flash
until you release the lever.
To Next Page
Loading...
