256
2-4. Using other driving systems
LX570_U (OM60D99U)
Neutral position
Shifting to the neutral position cuts drive power to the wheels.
■ Shifting from “H4” to the neutral position
Stop the vehicle completely.
Make sure the vehicle is stopped in a safe place while carrying out the
following procedure.
Confirm the following:
● The four wheel-drive control switch is in “H4”. (The low speed four-
wheel drive indicator light is not illuminated.)
If the switch is in “L4”, turn it to “H4”. (P. 254)
● The center differential is unlocked. (The center differential lock indi-
cator light is not illuminated.)
If the center differential is locked, press the center differential lock/
unlock switch to unlock the center differential. (P. 2 54)
Set the parking brake firmly and put the shift lever in “N”.
Turn the engine off if the engine is running, then turn the
“ENGINE START STOP” switch to the IGNITION ON mode.
Do not start the engine till the end of the procedure.
Shift the shift lever to “P”.
Depress and release the brake pedal 3 times.
Depress the pedal firmly each time, then keep the pedal depressed the
third time.
Shift the shift lever to “N”.
Depress and release the brake pedal 3 times.
Release the brake pedal once and then depress and release the brake
pedal 3 times.
Depress the pedal firmly each time, then keep the pedal depressed the
third time.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
To Next Page
Loading...
