297
2-4. Using other driving systems
2
When driving
LX570_OM_OM60L96U_(U)
The image is blurry
Dirt or foreign matter
(such as water droplets,
snow, mud etc.) is
adhering to the camera.
Flush the camera with a
large quantity of water.
After that, rinse the cam-
era lens with water and
wipe it clean with a soft and
wet cloth.
A vertical white streak is
on the screen
When a bright spot
(such as sunlight
reflecting off the body
of another vehicle) is
received by the camera,
a vertical streak may be
left above and below
the bright spot (smear
effect).
If this happens due to these
causes, it does not indicate
a malfunction.
Back up while visually
checking the vehicle’s sur-
roundings. (Use the moni-
tor again once conditions
have been improved.)
The image is out of align-
ment
The camera or sur-
rounding area has
received a strong
impact.
Have the vehicle inspected
by your Lexus dealer.
The guide lines are very
far out of alignment
The camera position is
out of alignment.
Have the vehicle inspected
by your Lexus dealer.
The estimated course
lines move even though
the steering wheel is
straight
There is a malfunction in
the signals being output
by the steering sensor.
Have the vehicle inspected
by your Lexus dealer.
Symptom Likely cause Solution
To Next Page
Loading...
