DTC C15A5/65 Actuator Malfunction
for Preparation Click here
DESCRIPTION
If the steering control ECU detects a malfunction in the lock mechanism, it will turn the master warning light on, store DTC C15A5/65, and stop VGRS
operation.
DTC Code DTC Detection Condition Trouble Area
C15A5/65
The steering control ECU detects that the LG terminal voltage is
abnormal.
Harness or connector
Steering actuator
Steering control ECU
WIRING DIAGRAM
INSPECTION PROCEDURE
1.CHECK HARNESS AND CONNECTOR (STEERING CONTROL ECU - STEERING ACTUATOR)
a. Disconnect the E84 steering control ECU connector.
b. Disconnect the E85 steering actuator connector.
c. Measure the resistance according to the value(s) in the table below.
To Next Page
Loading...
