STEERING ACTUATOR > REMOVAL
for Preparation Click here
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing
the steering column (Click here).
1. REMOVE STEERING COLUMN ASSEMBLY
a. Remove the steering column assembly ( Click here).
2. REMOVE STEERING ACTUATOR ASSEMBLY
a. While pushing the claws on both sides of the connector, move the lock in the
direction of the arrow.
b. Disconnect the connector.
c. Hold the clamp with needle nose pliers, then insert a screwdriver and turn it in
the direction shown in the illustration to remove the clamp of the steering column
hole cover.
d. Put matchmarks on the steering actuator and No. 2 steering intermediate shaft.
To Next Page
Loading...
