Lexus LX - Page 240

STEERING CONTROL ECU (for LHD) > INSTALLATION
for Preparation Click here
1. INSTALL STEERING CONTROL ECU
a. Install the ECU to the junction block with the bolt and nut.
Torque:
8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
2. INSTALL STEERING CONTROL ECU WITH JUNCTION BLOCK
a. Front side:
i. Connect the 5 connectors.
b. Rear side:
i. Install the ECU with junction block with the 2 bolt and nuts.
Torque:
8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
ii. Attach the 2 clamps.
iii. Connect the 7 connectors.