11. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH
a. Attach the clip to install the cover.
b. Install the clip.
12. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
a. Connect the connector.
b. Attach the 8 claws to install the panel pad.
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected ( Click here).
14. CHECK SRS WARNING LIGHT
a. Check the SRS warning light ( Click here).
To Next Page
Loading...
