9. REMOVE NO. 1 SWITCH HOLE BASE
a. Detach the 5 claws.
b. Disconnect the connectors and remove the switch hole base.
10. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY
a. Remove the 5 bolts and driver side knee airbag.
b. Disconnect the connector.
NOTICE:
When handling the airbag connector, take care not to damage the airbag wire
harness.
11. REMOVE INSTRUMENT PANEL BOX ASSEMBLY
a. Detach the 5 claws.
b. Remove the box and then disconnect the connectors.
To Next Page
Loading...
