POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM > CUSTOMIZE PARAMETERS
for Preparation Click here
CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)
NOTICE:
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
a. Connect the intelligent tester to the DLC3.
b. Turn the engine switch on (IG).
c. Turn the tester on.
d. Enter the following menus: Body / Tilt & Telescopic / Utility / Customize.
e. Select the setting by referring to the table below.
Tilt & Telescopic
Display Default Contents Setting
Autoaway / Return function ON Turn the auto away/return function ON/OFF ON/OFF
To Next Page
Loading...
