Lexus LX - Power Tilt and Power Telescopic Steering Column System Freeze Frame Data; FREEZE FRAME DATA

POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM > FREEZE FRAME DATA
for Preparation Click here
FREEZE FRAME DATA
a. Connect the intelligent tester to the DLC3.
b. Turn the engine switch on (IG) and check the freeze frame data by following the prompts on the intelligent tester screen.
Tilt & Telescopic
Tester Display Measurement Item/Range Normal Condition
Diagnostic
Note
Tilt Position
Current tilt position data/min.: 0000 H (0 edges), max.: FFFF H
(65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Telesco
Position
Current telescopic position data/min.: 0000 H (0 edges), max.:
FFFF H (65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Tilt Return
Position
Memorized tilt return position data/min.: 0000 H (0 edges),
max.: FFFF H (65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Telesco Return
Position
Memorized telescopic return position data/min.: 0000 H (0
edges), max.: FFFF H (65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Tilt Up Limit Uppermost tilt position/Not Mem or Mem
Not Mem: Position is not memorized
Mem: Position is memorized
-
Tilt Up Limit
Position
Uppermost tilt position data/min.: 0000 H (0 edges), max.:
FFFF H (65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Tilt Down Limit Lowermost tilt position/Not Mem or Mem
Not Mem: Position is not memorized
Mem: Position is memorized
-
Tilt Down Limit
Position
Lowermost tilt position data/min.: 0000 H (0 edges), max.:
FFFF H (65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Telesco Short
Limit
Shortest telescopic position/Not Mem or Mem
Not Mem: Position is not memorized
Mem: Position is memorized
-
Telesco Short
Limit Pos
Shortest telescopic position data/min.: 0000 H (0 edges), max.:
FFFF H (65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Telesco Long
Limit
Longest telescopic position/Not Mem or Mem
Not Mem: Position is not memorized
Mem: Position is memorized
-
Telesco Long
Limit Pos
Longest telescopic position data/min.: 0000 H (0 edges), max.:
FFFF H (65535 edges)
7000 to 9000 H
(28672 to 36864 edges)
-
Tilt Up SW
(CAN)
Input state of tilt up by manual switch/ON or OFF
ON: Tilt up is activated by manual
switch
OFF: Tilt up is not activated by
manual switch
-
Tilt Down SW
(CAN)
Input state of tilt down by manual switch/ON or OFF
ON: Tilt down is activated by manual
switch
OFF: Tilt down is not activated by
manual switch
-
Telesco Short
SW (CAN)
Input state of telescopic short by manual switch/ON or OFF
ON: Telescopic short is activated by
manual switch
OFF: Telescopic short is not
activated by manual switch
-
Telesco Long
SW (CAN)
Input state of telescopic long by manual switch/ON or OFF
ON: Telescopic long is activated by
manual switch
OFF: Telescopic long is not
activated by manual switch
-
S/B Mem 1 Tilt and telescopic memory position 1/Not Mem or Mem
Not Mem: Position is not memorized
Mem: Position is memorized
-
S/B Mem 2 Tilt and telescopic memory position 2/Not Mem or Mem
Not Mem: Position is not memorized
Mem: Position is memorized
-
S/B Mem 3 Tilt and telescopic memory position 3/Not Mem or Mem
Not Mem: Position is not memorized
Mem: Position is memorized
-
T&T Autoaway
Function
Auto away/return function/ON or OFF
ON: Auto away and return function is
allowed
OFF: Auto away and return function
is prohibited
-
Power Source
Voltage
Voltage data of power supply/min.: 0 V, max.: 20 V
Actual power supply voltage
11 to 14 V
-