POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM > DIAGNOSTIC TROUBLE CODE CHART
for Preparation Click here
HINT:
If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.
Power Tilt and Power Telescopic Steering Column System
DTC Code Detection Item Trouble Area See page
B2602 Key Unlock Warning Switch Circuit Malfunction
- CAN communication system
- Entry and start system (for start function)
- Multiplex tilt and telescopic ECU
Click here
B2603 Tilt and Telescopic Manual Switch Circuit Malfunction
- Tilt and telescopic manual switch
- Tilt and telescopic manual switch circuit
- Multiplex tilt and telescopic ECU
Click here
B2606 Key Code Confirm Signal Malfunction
- CAN communication system
- Entry and start system (for start function)
- Multiplex tilt and telescopic ECU
Click here
B2610 Tilt Position Sensor or Tilt Motor Circuit Malfunction
- Harness or connector
- Tilt position sensor or tilt motor
- Multiplex tilt and telescopic ECU
Click here
B2611 Telescopic Position Sensor or Telescopic Motor Circuit Malfunction
- Harness or connector
- Telescopic position sensor or telescopic motor
- Multiplex tilt and telescopic ECU
Click here
B2620 ECU Power Source Circuit Malfunction
- ECU-B1 fuse
- Harness or connector
- Multiplex tilt and telescopic ECU
Click here
B2621 Communication Interruption
- CAN communication system
- Multiplex tilt and telescopic ECU
Click here
B2624 Vehicles Speed Malfunction
- CAN communication system
- Combination meter assembly
- Multiplex tilt and telescopic ECU
Click here