Lexus LX - Page 327

INSPECTION PROCEDURE
1.READ VALUE USING INTELLIGENT TESTER (TILT AND TELESCOPIC MANUAL SWITCH)
a. Use the Data List to check if the tilt and telescopic manual switch is functioning
properly.
Tilt & Telescopic
Tester Display Measurement Item/Range Normal Condition
Diagnostic
Note
Tilt Up Switch Input state of tilt up by manual switch/ON or OFF
ON: Tilt up activated by manual switch
OFF: Tilt up not activated by manual switch
-
Tilt Down Switch
Input state of tilt down by manual switch/ON or
OFF
ON: Tilt down activated by manual switch
OFF: Tilt down not activated by manual
switch
-
Telesco Short
Switch
Input state of telescopic short by manual switch/ON
or OFF
ON: Telescopic short activated by manual
switch
OFF: Telescopic short not activated by
manual switch
-
Telesco Long
Switch
Input state of telescopic long by manual switch/ON
or OFF
ON: Telescopic long activated by manual
switch
OFF: Telescopic long not activated by manual
switch
-
OK:
"ON" is displayed on the intelligent tester screen when each switch is turned on.
"OFF" is displayed on the intelligent tester screen when each switch is turned off.
NG Go to step 3
OK
2.CONFIRM DTC