Lexus LX - Page 427

i. Disconnect connector B from the multiplex tilt and telescopic ECU.
ii. Apply battery voltage to the telescopic motor connector, and check the
steering column operation.
OK
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2
(TEM+)
Battery negative (-) → Terminal
6 (TEM-)
Steering column
contracts
Battery negative (-) → Terminal
2 (TEM+)
Battery positive (+) → Terminal 6
(TEM-)
Steering column
extends
If the result is not as specified, replace the steering column assembly.
7. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY
a. Install driver side knee airbag assembly ( Click here).
8. INSTALL UPPER STEERING COLUMN COVER
a. Attach the claw to install the upper steering column cover.
b. Attach the 4 clips to install the upper steering cover onto the instrument panel
cluster finish panel.
9. INSTALL LOWER STEERING COLUMN COVER
a. Attach the 2 claws to install the lower steering column cover.