a. Attach the 3 claws to connect the wiring harness protector and wire harness.
7. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY
a. Connect the connector.
NOTICE:
When handling the airbag connector, take care not to damage the airbag wire
harness.
b. Install the driver side knee airbag with the 5 bolts.
Torque:
10 N*m{ 102 kgf*cm , 7 ft.*lbf }
8. INSTALL INSTRUMENT PANEL BOX ASSEMBLY
a. Connect the connectors.
b. Attach the 5 claws to install the box.
9. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
a. Connect the connectors.
To Next Page
Loading...
