Lexus LX - Steering Wheel Removal; REMOVE STEERING PAD ASSEMBLY

a. Using a T30 "TORX" socket wrench, loosen the 2 screws until the groove along
the screw circumference catches on the screw case.
b. Pull out the steering pad from the steering wheel, as shown in the illustration.
Then support the steering pad with one hand.
NOTICE:
When removing the steering pad, do not pull the airbag wire harness.
c. Disconnect the horn connector.
d. Disconnect the 2 connectors and remove the steering pad.
NOTICE:
When handling the airbag connector, take care not to damage the airbag wire
harness.
6. REMOVE CRUISE CONTROL MAIN SWITCH
a. Disconnect the connector.
b. Remove the 2 screws and cruise control main switch.
7. REMOVE STEERING SHAKE DAMPER
a. Remove the 2 screws and steering shake damper.