Lexus LX - Steering Wheel Inspection; INSPECT STEERING PAD SWITCH ASSEMBLY (w; Dynamic Radar Cruise Control System)

STEERING WHEEL > INSPECTION
for Preparation Click here
CAUTION:
The vehicle is equipped with an SRS (Supplemental Restraint System) which includes components such as airbags. Before servicing (including
removal or installation of parts), be sure to read the PRECAUTION in the SRS (Click here).
1. INSPECT STEERING PAD SWITCH ASSEMBLY (w/ Dynamic Radar Cruise Control System)
a. Disconnect the z35 switch connector.
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection Switch Condition
Specified
Condition
6 (AU1) - 8 (EAU)
No switch is
pushed
100 kΩ
6 (AU1) - 8 (EAU)
Seek+ switch
pushed
Below 2.5 Ω
6 (AU1) - 8 (EAU)
Seek- switch
pushed
329 Ω
6 (AU1) - 8 (EAU)
Volume+ switch
pushed
1000 Ω
6 (AU1) - 8 (EAU)
Volume- switch
pushed
3110 Ω
7 (AU2) - 8 (EAU)
No switch is
pushed
100 kΩ