Lexus LX - Steering Wheel Installation; INSTALL STEERING WHEEL ASSEMBLY

STEERING WHEEL > INSTALLATION
for Preparation Click here
1. INSTALL STEERING WHEEL ASSEMBLY
a. Align the matchmarks on the steering wheel assembly and steering main shaft
assembly.
b. Install the steering wheel assembly set nut.
Torque:
50 N*m{ 510 kgf*cm , 37 ft.*lbf }
2. INSTALL STEERING SHAKE DAMPER
a. Install the steering shake damper with the 2 screws.
Torque:
2.4 N*m{ 25 kgf*cm , 21 in.*lbf }
3. INSTALL CRUISE CONTROL MAIN SWITCH
a. Install the cruise control main switch with the 2 screws.
b. Connect the connector.
4. INSTALL STEERING PAD
a. With the steering pad installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the steering pad
with a new one:
Cuts, minute cracks or marked discoloration on the steering pad top surface or in the grooved portion.
b. Make sure that the horn sounds.
HINT:
If the horn does not sound, inspect the horn system.