TILT AND TELESCOPIC MANUAL SWITCH > INSPECTION
for Preparation Click here
1. INSPECT TILT AND TELESCOPIC MANUAL SWITCH
a. Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection Switch Condition
Specified
Condition
1 (VC) - 3 (MSW)
Tilt up 342 to 378 Ω
Tilt down
1890.5 to 2089.5
Ω
Telescopic
contract
750.5 to 829.5 Ω
Telescopic extend 152 to 168 Ω
If the result is not as specified, replace the tilt and telescopic manual switch.
To Next Page
Loading...
