Lexus LX - Page 549

Torque:
87 N*m{ 887 kgf*cm , 64 ft.*lbf }
NOTICE:
Tighten the bolts in 3 steps, in the order shown in the illustration.
14. TIGHTEN FRONT NO. 1 STABILIZER BRACKET RH
a. Tighten the 2 bolts.
Torque:
87 N*m{ 887 kgf*cm , 64 ft.*lbf }
NOTICE:
Tighten the bolts in 3 steps, in the order shown in the illustration.
15. STABILIZE SUSPENSION
a. Install the front wheels.
Torque:
131 N*m{ 1336 kgf*cm , 97 ft.*lbf }
b. Lower the vehicle.
c. Press down on the vehicle several times to stabilize the suspension.
16. TIGHTEN FRONT STABILIZER LINK ASSEMBLY LH
a. Tighten the bolt.
Torque:
135 N*m{ 1376 kgf*cm , 100 ft.*lbf }
NOTICE:
Perform this procedure with all 4 wheels on the ground.
17. TIGHTEN FRONT STABILIZER LINK ASSEMBLY RH
a. Tighten the bolt.
Torque:
135 N*m{ 1376 kgf*cm , 100 ft.*lbf }