132
2-4. Using other driving systems
AHC indicator lights
If you change the vehicle height mode, the indicator lights change as fol-
lows:
• The current mode indicator light will turn off, and the selected mode
indicator light will begin flashing.
• Once the change in vehicle height is complete, the selected mode
indicator light will change from flashing to continuously lit.
If you press the height control switch while AHC is off, the current mode
indicator light will turn on and the selected mode indicator light will begin
flashing while the system starts up.
Once the system has started, the current mode indicator light will turn off.
■ Operating conditions
● The engine must be running.
● All side doors and the back door must be closed.
■ Automatic change in vehicle height when in the high mode
● If the vehicle speed exceeds 19 mph (30 km/h) with the four-wheel drive con-
trol lever in the “H” position, normal mode is automatically selected.
● If the vehicle speed exceeds 30 mph (50 km/h) with the four-wheel drive con-
trol lever in the “L” position, the vehicle height is lowered to 1.0 in. (25 mm)
higher than the normal mode height. If the vehicle speed drops to 12 mph (20
km/h) or less, high mode is automatically resumed.
To Next Page
Loading...
