137
2-4. Using other driving systems
2
When driving
■ To avoid damage to the vehicle
● If in the low mode, the vehicle automatically shifts to the normal mode when the
vehicle is started. Take care when overhead height is limited.
● After unloading, the vehicle height may be slightly higher than normal. Take care
when overhead height is limited.
● Before lowering the vehicle height, check that no-one is under the vehicle and
the area is free of obstructions. Also check that the underbody of the vehicle will
not touch the ground.
● Do not select the low mode when driving on bumpy roads, as the underbody of
the vehicle may contact the road surface.
■ Avoid rapid changes to the vehicle height
As the pump may overheat. Leave at least a minute between selections when
changing the AHC mode.