Lexus LX570 2017 - Engine Oil Level Check; Brake Fluid Level Check

ENGINE HOOD RELEASE LEVER
Usetheenginehoodreleaselevertocheckthatthelatch
operatesproperly.Ensurethattheenginehoodopensand
closessmoothly.
BRAKE FLUID LEVEL
Visuallychecktheuidlevelthroughthereservoir.Ifthe
uidlevelislow,replenishthebrakeuidreservoirwith
FMVSSNo.116DOT3orSAEJ1703brakeuidandcheck
foruidleaks.Brakeuidlevelshouldbeatthe“MAX”line
(within0.2inches[5.0mm]below).
NOTE:
RefertotheRepair Manualforuidspecications.
ENGINE OIL LEVEL (ENGINE NOT
RUNNING)
a)Removetheengineoilleveldipstickandwipeitclean. 
 Reinsertthedipstickandpullitouttochecktheoillevel. 
 Thelevelshouldbebetweenthetwomarks.
1
Low
2
Normal
   Excessive
b)Checktheoilfordirtorimpurities.
NOTE:
Iftheoillevelislow,addspeciedengineoilandcheck 
foroilleaks.
3
2
LX570
INSPECTION DETAILS - A. ENGINE COMPARTMENT