79
1. BASIC OPERATION
LX570_Navi_OM60P47U_(U)
16.05.31 17:44
NAVIGATION SYSTEM
3
To scroll over the map screen, place the
cursor mark in the desired position and
then press and hold the Remote Touch
knob. The map will continue scrolling in that
direction until the knob is released.
Press the “MAP” button on the Remote
Touch to return to the current position.
1 Select one of the 8 directional arrows to
move the cursor to the desired point
and then select “OK”.
ADJUSTING LOCATION IN
SMALL INCREMENTS
The cursor location can be adjusted in
small increments when “Adjust Loca-
tion” is selected on the setting map
screen.
Also, when changing the location of
memory points on the editing screen
(→P.124) and adjusting the current po-
sition mark manually on the “Calibration”
screen (→P.131), 8 directional arrows
may appear for this purpose.
To Next Page
Loading...
