Lexus LX570 - Selecting Search Area; Setting Home as Destination; Setting Preset Destinations as Destination

91
2. DESTINATION SEARCH
LX570_Navi_OM60P47U_(U)
16.05.31 17:44
NAVIGATION SYSTEM
3
1 Display the “Destination” screen.
(→P.89)
2 Select “Address”, “Point of Interest” or
“Intersection & Freeway”.
3 Select “Select State/Province” or
“Change State/Province”.
 If a state (province) has not been selected
yet, “Select State/Province” is displayed.
4 Select the desired state (province).
 To change countries, select the “United
States”, “Canada” or “Mexico” tab.
 For map database information and updates:
→P.101
1 Display the “Destination” screen.
(→P.89)
2 Select “Go Home”.
 The navigation system performs a search
for the route and the entire route map is
displayed. (→P.101)
1 Display the “Destination” screen.
(→P.89)
2 Select any of the preset destination but-
tons (1-5).
 The navigation system performs a search
for the route and the entire route map is
displayed. (→P.101)
SELECTING SEARCH AREA
The selected state (province) can be
changed to set a destination from a
different state (province) by using
“Address”, “Point of Interest” or
“Intersection & Freeway”.
SETTING HOME AS
DESTINATION
To use this function, it is necessary to
register a home address. (→P.119)
SETTING PRESET
DESTINATIONS AS
DESTINATION
To use this function, it is necessary to
register preset destinations to the preset
screen buttons (1-5). (→P.120)