INSPECTION DETAILS - B. Vehicle Interior
57 LX570
B24. CHECK WIDE-VIEW FRONT
AND SIDE MONITOR SYS-
TEM*
When the engine switch is in the "IG-
ON" mode and the shift lever is shifted in
the "P" or “D“ or “N“ position, check that
the wide view front and side monitor is
displayed on the screen.
a ) Press the “VIEW“ switch and check that
the each monitor changes as follows:
• When the wide-view front monitor was
displayed the previous time:
• When the side monitor was displayed
the previous time:
B25. CHECK AND SET CLOCK
With the engine switch in the "ACC" or "IG-
ON" mode, check that the clock is operating.
Without navigation system:
a ) Press the "INFO" button.
b ) Touch "Adjust Clock".
c ) Set the clock to the proper time.
To reset the hour, touch “H“.
To reset the minutes, touch the “M“.
To adjust the time to the nearest hour,
touch ”:00”.
d ) Turn daylight saving time on.
e ) Turn daylight saving time off.
f ) After setting, touch “OK“.
With navigation system:
Refer to Navigation System Owner’s Manu-
al.
08LXIIIB092I
08LXIIIB093I
Wide-View Front & Side Monitor Simultaneous
Display
Wide-View Front Monitor
Side Monitor
2
3
1
08LXIIIB094I
1
2
3
1
ooo
* Optional equipment
1
3 2
1
ooo