34
1. BASIC INFORMATION BEFORE OPERATION
LX570_Navi_OM60K73U_(U)
12.10.31 14:29
2 Touch the desired screen button to ad-
just contrast and brightness.
3 After adjusting the screen, touch “OK”.
The screen goes off when “Screen Off” is
touched. To turn the screen back on, press
any button. The selected screen appears.
1 To display the screen in day mode, even
with the headlight switch on, touch “Day
Mode” for brightness and contrast con-
trol.
In the following conditions, the displays
condition is not changed to night mode
even if headlight switch is turned on:
• The instrument panel light control switch
is turned fully to the right.
• The vehicle is in a bright area, such as out-
side in direct sunlight.
Screen button Function
“Contrast” “+”
Touch to strengthen the
contrast of the screen.
“Contrast” “-”
Touch to weaken the
contrast of the screen.
“Brightness” “+”
Touch to brighten the
screen.
“Brightness” “-”
Touch to darken the
screen.
CHANGING BETWEEN DAY
AND NIGHT MODE
Depending on the position of the head-
light switch, the screen changes to day
or night mode.
●If the screen is set to day mode with the
headlight switch turned on, this condition
is memorized even with the engine
turned off.
To Next Page
Loading...
