36
1. BASIC INFORMATION BEFORE OPERATION
LX570_Navi_OM60K73U_(U)
12.10.31 14:29
1 Touch “Enter ”.
The screen changes and displays the map
location of the selected destination and the
route preference. (See “STARTING
ROUTE GUIDANCE” on page 78.)
1 Touch “Mark”.
2 This screen is displayed.
The registered point is shown by on the
map.
After the screen is scrolled, the map
remains centered at the selected location
until another function is activated. The
current position mark will continue to
move along your actual route and may
move off the screen. When the “MAP/
VOICE” button is pressed, the current
position mark returns to the center of the
screen and the map moves as the vehicle
proceeds along the designated route.
When the scroll feature is used, the cur-
rent position mark may disappear from
the screen. Press the “MAP/VOICE”
button to display the current position on
the map screen.
TO SET THE CURSOR
POSITION AS A DESTINATION
A specific point on the map can be set as
a destination using the scroll function.
TO REGISTER THE CURSOR
POSITION AS AN ADDRESS
BOOK ENTRY
Address book entry registration enables
easy access to a specific point.
To change the icon or name, etc., see
“EDITING ADDRESS BOOK
ENTRIES” on page 106.
●Up to 100 address book entries can be
registered. If there is an attempt to regis-
ter more than 100 address book entries,
an error message will appear.