42
1. BASIC INFORMATION BEFORE OPERATION
LX570_Navi_OM60K73U_(U)
12.10.31 14:29
■ EDITING RIGHT MAP
1 Touch the desired screen button.
The following procedures can be per-
formed on this screen:
2 Touch “OK” when editing is completed.
The screen returns to the dual map screen.
■ COMPASS
Information about the destination, current
position and a compass is displayed on the
screen.
The right side map can be edited by
touching any point on the right side map.
No. Function
Changing the orientation of the map
Displaying POI icons
Showing XM NavTraffic
®
informa-
tion (See page 166.)
Displaying eDestination icons (See
page 191.)
Changing the map scale
The current position is indicated with a
compass.
While on a different screen, touching
“Compass” will display the compass
mode screen.
●The destination mark is displayed in the
direction of the destination. When driv-
ing, refer to the longitude and latitude
coordinates, and the compass, to make
sure that the vehicle is headed in the
direction of the destination.
●When the vehicle travels out of the cover-
age area, the guidance screen changes to
the compass mode screen.