254
2-4. Using other driving systems
LX570_U (OM60F86U)
■ To avoid damage to the vehicle
● After unloading, the vehicle height may be slightly higher than normal. Take care
when overhead height is limited.
● Before lowering the vehicle height, check that no-one is under the vehicle and
the area is free of obstructions. Also check that the underbody of the vehicle will
not touch the ground.
● Do not select the low mode when driving on bumpy roads, as the underbody of
the vehicle may contact the road surface.
● When travelling on bumpy roads or through water, or when towing, turn off easy
access mode.
■ Avoid rapid changes to the vehicle height
As the pump may overheat. Leave at a few seconds between selections when
changing the vehicle height mode.
To Next Page
Loading...
