19
LX600_QG_OM60V82U_(U)
1 Stop the vehicle completely.
2 If the parking brake is in manual mode, set the parking brake. (P.25)
Check the parking brake indicator is illuminated.
3 Shift the shift lever to P. (P.21)
4 Press the engine switch shortly and firmly.
The engine will stop, and the meter display will be extinguished.
Release the shift lever when pressing the engine switch.
5 Release the brake pedal and check that “ACCESSORY” or “IGNITION ON” is not
shown on the multi-information display.
Modes can be changed by pressing the engine switch with the brake pedal released. (The
mode changes each time the switch is pressed.)
1 OFF*
The emergency flashers can be used.
The multi-information display will not
be displayed.
2 ACC
Some electrical components such as
the audio system can be used.
“ACCESSORY” will be displayed on
the multi-information display.
3 ON
All electrical components can be used.
“IGNITION ON” will be displayed on
the multi-information display.
*: If the shift lever is in a position other than P when turning off the engine, the engine
switch will remain ON, will not turn to OFF.
Stopping the engine
Changing engine switch modes
To Next Page
Loading...
