36
LX600_QG_OM60V82U_(U)
■ Switching to the high beams
Push the lever away from you.
The Automatic High Beam indicator will
turn off and the headlight high beam indica-
tor will turn on.
Pull the lever to its original position to acti-
vate the Automatic High Beam system
again.
■ Switching to the low beams
Press the Automatic High Beam switch.
The Automatic High Beam indicator will
turn off.
Press the switch to activate the Automatic
High Beam system again.
■ Temporarily switching to the low beams
Pull the lever toward you and then return it
to its original position.
The high beams are on while the lever is
pulled toward you, however, after the lever
is returned to its original position, the low
beams remain on for a certain amount of
time. Afterwards, the Automatic High
Beam will be activated again.
Turning the high beams on/off manually
To Next Page
Loading...
Need help?
General
