99
2-1. Instrument cluster
2
Vehicle status information and indicators
tion data
Use the displayed average fuel consump-
tion as a reference. The image is an exam-
ple only, and may vary slightly from actual
conditions.
■ Updating the history data
Update the latest fuel consumption by
selecting “Update” to measure the current
fuel consumption again.
■ Resetting the data
The fuel consumption data can be deleted
by selecting “Clear data”.
■ Trip range
Displays the estimated maximum distance
that can be driven with the quantity of fuel
remaining.
This distance is computed based on your
average fuel consumption.
As a result, the actual distance that can be
driven may differ from that displayed.
Pop-up displays will be displayed on
the multi-information display or the
head-up display (if equipped) when
necessary.
When a pop-up display is displayed, a cur-
rent display may no longer be displayed. In
this case, the display will return after the
pop-up display disappears.
■ Driving support systems
Displays a warning/suggestion/advice
message or the operating state of a rel-
evant system.
Dynamic radar cruise control
Cruise control
LTA (Lane Tracing Assist)
LCA (Lane Change Assist) (if
equipped)
LDA (Lane Departure Alert)
PDA (Proactive Driving Assist)
PCS (Pre-Collision System)
RSA (Road Sign Assist) (if
equipped)
Safe Exit Assist
■ Warning message
Some warning messages are displayed
when necessary, according to certain
conditions.
Warning messages are disappeared
by pressing and holding switch func-
tion change switch. (P.95)
■ Hands-free system status
Displayed when the hands-free system
is operated.
■ Suggestion function
Displays suggestions to the driver in
the following situations. To select a
response to a displayed suggestion,
use the steering switches.
Suggestion to turn off the headlights
If the headlights are left on for a certain
amount of time after the power switch has
been turned off, a suggestion message will
be displayed.
Suggestion to enable the power
back door
If the power back door system is disabled
(setting on the multimedia display set to
off) and the power back door switch on the
instrument panel is operated, a suggestion
message will be displayed asking if you
wish to enable the power back door sys-
tem.
Pop-up display information
To Next Page
Loading...
