Lexus LX700h 2025 - Page 128

126
3-2. Opening, closing and locking the doors
The power back door system can be
enabled/disabled on the multimedia
display. (P.677)
1 Select on the multimedia dis-
play.
2 Select “Vehicle customize”.
3 Select “Door control”.
4 Select “Power back door”.
5 Select (ON)/
(OFF).
When OFF is selected and the operations
of the power back door is made to stop
from the multimedia display, unless it is set
to ON, the operation of the power back
door will not return. (No return in the
engine switch operation)
The Hands Free Power Back Door
(kick sensor) can be enabled/disabled
on the multimedia display. (P.677)
1 Select on the multimedia dis-
play.
2 Select “Vehicle customize”.
3 Select “Door control”.
4 Select “Hands free”.
5 Select (ON)/
(OFF).
When OFF is selected and the operations
of the Hands Free Power Back Door is
made to stop from the multimedia display,
unless it is set to ON, the operation of the
Hands Free Power Back Door will not
return. (No return in the engine switch
operation)
The open position of the power back
door can be adjusted.
1 Stop the back door in the desirable
position. (P.114)
2 Press and hold the switch on
the lower part of the back door for
approximately 2 seconds.
When the settings are completed, the
buzzer sounds 4 times.
When opening the back door the next
time, the back door will stop at that posi-
tion.
NOTICE
● Do not disassemble the rear bumper.
● Do not attach stickers to the rear
bumper.
● Do not paint the rear bumper.
● If a bicycle carrier or similar heavy
object is attached to the power back
door, disable the kick sensor.
Canceling the power back door
system
Canceling the Hands Free
Power Back Door (if equipped)
Adjusting the open position of
the back door