EasyManua.ls Logo

Lexus LX700h 2025 - Page 136

Lexus LX700h 2025
748 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
134
3-3. Adjusting the seats
passenger mode is selected.
2 Using the seat adjustment switches
on the driver’s seat, adjust the front
passenger’s seat.
To cancel front passenger mode, press the
mode change button again.
Front passenger mode will be canceled
automatically if the driver’s seat adjustment
switches are not operated for approxi-
mately 30 seconds.
Using the multimedia display
1 Select on the Main menu.
2 Select “Seat controls”.
3 Select “Arrangement”.
4 Select the passenger’s seat.
5 Select the button for the desired
operation.
Move the front passenger’s seat
forward and fold the seatback and
head restraint. (extra front)
Move the front passenger’s seat
rearward and the seatback and
head restraint to the upright posi-
tion.
To stop the front passenger’s seat while it is
moving, select the or passenger’s
seat operation button or press the seat
switch.
Folds the rear display
Press it again to extend them to the original
position.
Operating the foldable head restraint
using the front passenger’s seat adjust-
ment switches
When the front passenger’s head restraint
is folded forward and the front passenger’s
door is open, if the front passenger’s seat
adjustment switches are used to move the
seat backward or recline the seatback, the
head restraint will move to the upright posi-
tion automatically when the switch is
released.
To stop the operation of the front passen-
ger’s head restraint part-way, perform any
of the following operations:
Operate any front passenger’s seat
adjustment switch.
Press the “SET” button.
Press the “1”, “2” or “3” button.
Press the seat switch.
Operation of the front passenger’s seat
using the multimedia display will be can-
celed when
In the following situations, the front passen-
ger’s seat cannot be operated using the
multimedia display:
The power switch is in ACC or OFF.
The weight of an occupant or heavy
object, etc. is detected on the front pas-
senger’s seat.
Once weight is detected on the seat, the
seat will be judged as occupied until the
front passenger’s door is opened then
closed or the power switch is turned off.
A
B
A B
C

Table of Contents

Related product manuals