147
3-3. Adjusting the seats
3
Before driving
seat with ottoman, and then fold the
seatback of the rear seat (relax
mode)
The seat with ottoman moves forward, and
the head restraint also folds forward.
To stop the front passenger seat while it is
moving, touch “STOP”.
Moves the rear seat to the upright
position (Business Mode)
Folds the rear display (rear seat
with ottoman)
Press it again to extend them to the original
position.
■ Manual operation
1 Display the home screen on the
Rear Multi Operation Panel
(P.483) and then select “Seat”.
2 Select “Left” or “Right”.
3 Select the button for the desired
adjustment.
Seatback angle adjustment
Seat cushion (front) angle adjust-
ment
Ottoman angle adjustment (if
equipped)
Seat position adjustment (front pas-
senger’s seat)
Seat position adjustment (rear seat)
(if equipped)
The part will move while a button is
touched.
■ Operating conditions of Business Mode
When the rear seat belt is fastened, Busi-
ness Mode cannot be selected.
■ The rear seat with an ottoman cannot be
moved to Relaxation Mode when
In the following situations, Relaxation Mode
cannot be selected:
● The power switch is in ACC or OFF.
● The weight of an occupant or heavy
object, etc. is detected on the front pas-
senger’s seat.
Once weight is detected on the seat, the
seat will be judged as occupied until the
front passenger’s door is opened then
closed or the power switch is turned off.
● The front passenger’s seat belt is fas-
tened.
● The front passenger’s door is open.
■ Pre-collision seatbacks
If the PCS (Pre-Collision System) deter-
mines that the possibility of a frontal colli-
sion is high, it may move the seatbacks of
the front passenger’s seat and power rear
seats to the upright position automatically, if
reclined. (P.249)
If a seat is being adjusted, it may not be
moved by the pre-collision seat function.
1 Select on the Main menu.
2 Select “Seat controls”.
3 Select “Arrangement”.
4 Select the rear seat.
5 Select “Return”.
B
C
A
B
D
Returning the rear seat from the
front seats
E
To Next Page
Loading...
